We are Dedicated to provide the Best services at the lowest possible cost.


SS 316 / 316L

Stainless Steel 316 is the standard molybdenum-bearing grade, second in importance to SS 304 amongst the austenitic stainless steels. The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Stainless Steel 316 has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections. SS 316L, the low carbon version of SS 316 and is immune from sensitisation (grain boundary carbide precipitation).SS 316H, with its higher carbon content has application at elevated temperatures, same as SS 316Ti which is a Titanium stabilised grade .SS 316N is nitrogen enhanced with greater strength than SS 316 .


Stainless Steel SS 310 / 310S
AISI 310 / 310S

UNS S31000 / S31008

Werkstoff Nr. 1.4841 / 1.4845

Mechanical & Physical Properties

Density 8.0 g/cm3

Melting Point 1454 °C (2650 °F)

Tensile Strength Psi-75000 , MPa-515

Yield Strength (0.2%Offset) Psi-30000 , MPa-205

Elongation 35 %

Chemical Composition


SS 310 SS 310S
Ni 19-22


Cr 24-26


C 0.25 max

0.08 max

Fe Balance

Mn 2 max

2 max

Si 1.50 max

1.50 max

S 0.03 max

0.03 max

P 0.045 max

0.045 max


Chemical Industry
Fabrication Industry
Pharmaceutical Industry
Petrochemical Industry
Food Processing Industry
Heat Exchangers